Quick start LogicWorks
Installation
Just unzip the file into your directory (download LogicWorks 5, easy
example and-led.cct )
Look for "LogicWorks.exe"
To make a circuit:
1. Select component from component windows
2. Drag it to the drawing board
3. To connect wires, draw a line joining them.
Component windows
>ALL LIBRARIES
neccessary components
AND-2
OR-2
NOT
Binary Switch
+5v
GND
Resister
LED-red
to set the value of a resister:
>click at the components
Attributes
Value
type in: 1K
Done
running
>Simulation
Run
Show values
A ready made example:
>File>Open
then select
"and-led.cct"
OK OK
To see a sequential circuit:
>File>Examples> 3-bit-counter
It will start to run. To slow it down adjust the slider in the
tool bar.
Document
You can find the reference manual under the directory: LogicWorks5/Documentation/
last update 17 June 2012